NetBSD 1.5ZA (MOMO) #5: Sun Jan 27 02:12:30 JST 2002 root@sanctuary.iij.ad.jp:/usr/src/sys/arch/i386/compile/MOMO cpu0: Intel Pentium III (Tualatin) (686-class), 797.37 MHz cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way cpu0: L2 cache 512 KB 32b/line 8-way cpu0: features 383f9ff cpu0: features 383f9ff total memory = 383 MB avail memory = 350 MB using 4928 buffers containing 19712 KB of memory BIOS32 rev. 0 found at 0xfd7e0 PCI BIOS rev. 2.1 found at 0xfd8fe PCI IRQ Routing Table rev. 1.0 found at 0xfdeb0, size 256 bytes (14 entries) PCI Interrupt Router at 000:31:0 (Intel 82371FB PCI-to-ISA Bridge (PIIX)) pci_addr_fixup: 000:31:1 0x8086 0x248a new address 0x18000000 mainbus0 (root) pnpbios0 at mainbus0: nodes 22, max len 238 pnpbios0: not docked pnpbios0: node index mismatch (static): requested 0, got 1 pckbc1 at pnpbios0 index 7 (PNP0303): kbd port pckbc2 at pnpbios0 index 18 (IBM3780, attached as PNP0F13): aux port fdc1 at pnpbios0 index 21 (PNP0700) fdc1: io 3f0-3f5 3f7, irq 6, dma 2 pckbd0 at pckbc1 (kbd slot) pckbc1: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc1 (aux slot) pckbc1: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled pchb0 at pci0 dev 0 function 0 pchb0: Intel 82830MP CPU to I/O Bridge 1 (rev. 0x02) agp at pchb0 not configured ppb0 at pci0 dev 1 function 0: Intel 82830MP CPU to AGP Bridge (rev. 0x02) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled vga1 at pci1 dev 0 function 0: ATI Technologies product 0x4c59 (rev. 0x00) wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 uhci0 at pci0 dev 29 function 0: Intel 82801CA/CAM USB Controller (rev. 0x01) uhci0: interrupting at irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1: Intel 82801CA/CAM USB Controller (rev. 0x01) uhci1: interrupting at irq 11 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2: Intel 82801CA/CAM USB Controller (rev. 0x01) uhci2: interrupting at irq 11 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x41) pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled cbb0 at pci2 dev 3 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0xa8) cbb1 at pci2 dev 3 function 1: Ricoh 5C476 PCI-CardBus bridge (rev. 0xa8) Ricoh product 0x0552 (Firewire serial bus, interface 0x10) at pci2 dev 3 function 2 not configured wi0 at pci2 dev 5 function 0: Intersil Prism2.5 Wireless Lan wi0: interrupting at irq 11 wi0: 802.11 address 00:20:e0:89:3b:1d wi0: using RF:PRISM2.5 MAC:ISL3874A(PCI), Firmware: 1.3 variant 3 fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller, rev 65 fxp0: interrupting at irq 11 fxp0: Ethernet address 00:d0:59:83:2d:03 ukphy0 at fxp0 phy 1: Generic IEEE 802.3u media interface ukphy0: i82562ET 10/100 media interface (OUI 0x005500, model 0x0033), rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto cbb0: interrupting at irq 11 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 pcmcia0 at cardslot0 cbb1: interrupting at irq 11 cardslot1 at cbb1 slot 1 flags 0 cardbus1 at cardslot1: bus 4 device 0 pcmcia1 at cardslot1 pcib0 at pci0 dev 31 function 0 pcib0: Intel 82801CAM LPC Interface (rev. 0x01) pciide0 at pci0 dev 31 function 1: Intel 82201CA IDE Controller (rev. 0x01) pciide0: bus-master DMA support present pciide0: primary channel wired to compatibility mode wd0 at pciide0 channel 0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 28615 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 58605120 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) pciide0: primary channel interrupting at irq 14 wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers) pciide0: secondary channel wired to compatibility mode pciide0: disabling secondary channel (no drives) Intel 82801CA/CAM SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured auich0 at pci0 dev 31 function 5: i82801CA AC-97 Audio auich0: interrupting at irq 11 auich0: CRY54 codec; headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D audio0 at auich0: full duplex, mmap, independent Intel 82801CA/CAM Modem (modem communications, revision 0x01) at pci0 dev 31 function 6 not configured isa0 at pcib0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 isapnp0: no ISA Plug 'n Play devices found apm0 at mainbus0: Power Management spec V1.2 biomask effd netmask effd ttymask ffff IPsec: Initialized Security Association Processing. boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)